With the gradual warming of the weather, the heating function of the wall mounted furnace will be suspended. Recently, the backstage has received a lot of inquiries from users about this kind of problem. Now, Arnold will introduce the key points and maintenance of summer mode of bono'an wall mounted furnace
How to start the summer mode of wall mounted furnace?
1. Press the mode key to switch the wall mounted furnace to the summer mode
2. After switching, the screen will display the "little sun" icon
3. Because the models of wall mounted furnaces are different, the positions of buttons and adjustment are different, but the methods are almost the same
4. If you can't operate, you can call the national unified service hotline of bono'an wall mounted furnace: 400-805-1588~
What should be paid attention to when opening summer mode?
1. Check the water pressure gauge of the wall mounted boiler. If the pressure is between 1 bar and 1.5 bar, it is normal. If the pressure is too low, it is necessary to make up water;
2. Check whether each pipeline valve is in the open state;
3. Plug in the power plug of the wall mounted furnace;
4. Adjust the working mode to the summer mode (hot water mode), please refer to the instruction manual;
5. When hot water is needed, turn the tap to the hot water direction and turn it on, and the wall mounted boiler will automatically output hot water.
reminder
The gas-fired wall mounted boiler is equipped with circulating water pump. As the water pump is always in the hot water of the system, it is easy to cause the pump shaft to rust. If you do not plan to use the hot water function of the gas-fired wall mounted boiler in summer, please let the water pump of the furnace run for at least 2 minutes every week.
